Easy to install, the intumescent pipe closer is available for pipework from 32mm and 315mm and is suitable for masonry and gypsum along with concrete floors and walls in all types of construction. CE Marked and certified for PVC-U, PVC-C, PE, LDPE, MDPE, HDPE, ABS, SAN+PVC and PP to standards including EN 1366-3:2009, the pipe closer is a replacement for our popular pipe collars.
They do exactly the same job as their predecessor, these maintain the fire resistance of fire-rated floors and walls where they’re breached by continuous plastic pipes. Complete with a circular steel shell, the pipe closer splits in two for easy installation around the pipe, after which you can securely join together using a ‘slide-lock’. The intumescent pipe closers also provide effective sound insulation up to 58 decibels.
Generally used for drainage and sewage pipework and supplied with brackets for secure surface mounting, the pipe closer is packed full of graphite-based reactive material which reacts in less than two minutes in any instance where it is exposed to heat. It does this by closing the opening left by the softening plastic in a fire.
When selecting your required intumescent pipe closer, our size is the internal diameter of the collar, and so it equates to the external diameter of the pipe. It is also possible to fit smaller pipes within larger closers, with an additional benefit being that you can accommodate pipes where the opening around the pipe is too large or if they are at an angle.